China FactoryAirless Paint Sprayer
I am a co-founder of SCENTURY. I have been working with SCENTURY for 16 years now. Click the button below to get great ideas on how we help you to gain more market with our airless paint sprayer and other related painting tools.
Table Of Contents For This Page
It is not easy to introduce all aspects of airless paint sprayer（airless painting pump machine), so we have prepared a lot of information on this page for you to delve into. To make sure you can find the information you want quickly, we have prepared this content directory that will jump to the corresponding location when you click on it.
What is Airless Paint Sprayer?
An airless paint sprayer is a device that uses compressed air to atomize paint or other liquids. This allows the user to apply a coating of material in a uniform manner. Airless paint sprayers are often used for painting automobiles, furniture, and buildings. They offer many advantages over traditional painting methods, such as reduced labor costs and improved efficiency.
The Basic Knowledge About Airless Paint Sprayer
Airless paint sprayers are widely used in various painting applications due to their efficiency and effectiveness. Here’s a detailed overview of airless paint sprayers
Airless paint sprayers are a great way to quickly and easily paint large surfaces. They are perfect for painting the exterior or interior of a house, as well as fences, sheds, and decks.
A pump is used to bring the paint material to a pressure of up to 250 bar and then through an airless spray gun.
When the paint valve (gun) is opened, the paint is forced through an opening in the airless tip of the right size relevant to the requirements. Atomisation is created through the pressure difference between the coating material and the atmosphere.
The flow rate and spray jet width are determined by the tip.
Usually airless paint sprayer is including these main parts: motor, pump (piston pump or diaphragm pump), gear housing and control system.
- Water and solvent-based paints, varnishes, lacquers, oils, separating agents
- Synthetic resin-based paints, PVC paints, 2-K lacquers
- Primers, fillers
- Fireproofing paints, corrosion protection paints
- Emulsion, latex paints, adhesives, sealants
- Masonry paint, roof linings, floor coatings, silicon resin paint
- Fillers and other high viscosity materials
- High-Pressure System: Airless paint sprayers work by pumping paint at high pressure, up to 3000 psi, through a hose and out a tiny hole in the spray gun’s nozzle.
- Atomization of Paint: This high pressure forces the paint through a small tip, atomizing it into tiny droplets without the use of compressed air.
- Speed and Efficiency: They are much faster than traditional brushing or rolling methods, making them ideal for large projects.
- Even Coating: Provides a smooth, uniform coating, even on surfaces with irregularities.
- Versatility: Capable of handling a wide range of paint types and viscosities.
- Reduced Overspray: Airless systems have less overspray compared to air-assisted systems.
- Handheld Models: Portable and ideal for small to medium projects.
- Cart Models: Larger, more powerful, and suitable for extensive, heavy-duty work.
- Stationary Units: Used for industrial-scale projects, offering the highest capacity and power.
- Spray Hose: Transports the paint from the pump to the gun.
- Spray Gun: Where the paint is atomized and released.
- Spray Tip: Vary in size and shape to suit different types of paint and desired finish.
- Extension Pole: Extend the height of the spray, and you can spray higher places when working
- Swivel for Spray Gun: Enables the gun to adjust the angle of the nozzle holder and the spray nozzle when in use, to spray some of the corners of the position.
- Proper Tip Selection: Choose the right size and shape for the specific paint and desired finish.
- Regular Cleaning: Essential to prevent clogging and prolong the life of the sprayer.
- Safety Measures: Wear protective gear and be cautious of the high pressure.
- Residential and Commercial Painting: Ideal for walls, ceilings, fences, and other large surfaces.
- Industrial Applications: Used for coating large machinery and industrial components.
- Regular cleaning and flushing of the system to prevent paint build-up.
- Periodic checks of hoses and seals for wear and tear.
- Lubrication of moving parts as recommended by the manufacturer.
- Consider the Project Size: Choose a model based on the scale of your typical projects.
- Assess the Features: Look for adjustable pressure controls, easy-to-clean filters, and the type of pump.
- Brand and Warranty: Opt for reputable brands with good customer support and warranty terms.
Different Shipping Options
International trade transportation is a crucial component of global trade, involving different modes of transport, each with its characteristics and applications. Here are the detailed aspects of international trade transportation methods. SCENTURY will help you to choose the best shipping way for your airless sprayer machine order.
Sea Freight
- Most Commonly Used: Suitable for large volumes of cargo, especially heavy or bulky items.
- Cost-Effective: Generally lower in cost compared to other modes, ideal for non-urgent goods.
- Flexibility: Offers a variety of container options, like standard containers, bulk cargo, refrigerated goods, etc.
- Longer Transit Time: Due to longer distances, transit times are usually extended.
Air Freight
- Fast: Ideal for urgent goods, like time-sensitive products.
- Higher Cost: More expensive compared to sea freight.
- High Safety: Lower risk of loss and damage to goods.
- Volume and Weight Restrictions: Certain limitations on the size and weight of goods.
Road Transport
- Flexibility and Convenience: Suitable for short distances or land-based transport, especially in landlocked countries.
- Door-to-Door Service: Direct transport from the place of dispatch to the destination.
- Cost and Speed: Vary depending on distance and geographical conditions.
Rail Transport
- Ideal for Long-Distance: Especially applicable for intercontinental cargo transport.
- Cost and Efficiency: Can be more efficient and economical than road transport in some cases.
- Large Capacity: Suitable for transporting large quantities of goods.
- Geographical Limitations: Dependent on the rail network coverage.
Factors to Consider When Choosing a Transport Mode
- Nature of Goods: Perishability, fragility, volume, weight, etc.
- Cost Budget: Selection based on financial capability.
- Destination: Distance, geographical location, accessibility, etc.
- Time Requirements: Based on customer delivery time expectations.
- Safety and Reliability: Especially for high-value or fragile items.
In conclusion, selecting the most suitable mode of transportation depends on various factors including the nature of the goods, cost, destination, time requirements, and safety. Understanding the characteristics of each transport mode helps make the best decisions in international trade activities.
General Hot Selling Airless Paint Sprayer
Iairless.com (SCENTURY) factory was founded in 2006, and we have been in this field for more than 16 years. We now have all ranges of airless paint sprayer related products. If you need more information, please contact us directly.
Electric Piston Pump
- Small Power Piston Pump 390,395,495,595,695
- Middle Power Piston Pump 695,795
- Big Power Piston Pump 1095, MARK V, MARK X
Electric Diaphragm Pump
- Electric Diaphragm Pump with Mechanical Pressure Regulate
- Electric Diaphragm Pump with Electronic Pressure Regulate
- From 2L to 7L output
Hydraulic Pump Airless Spraryer
- 960/970 Similar Hydraulic Pump
- 300/833 Similar Hydraulic Pump
- 400Bar High Pressure Hydraulic Pump
- Other New Design Hydraulic Pump
Texture Spraryer
- small size TXP1 texture sprayer
- middle size TX770 texture sprayer
- large size TX9500 texture sprayer
- fireproof coating machine ST-FP480
Road Marking Machine / Line Stripper
- New Design Battery Power with Piston Pump RM05
- Gasoline Engine Piston Pump RM04, RM07
- Gasoline Engine Diaphragm Pump RM01
- Gasoline Engine Hydraulic Pump RM08, RM09
Pneumatic / Air-Assisted Airless Sprayer
- 45:1, 68:1 pneumatic airless sprayer with Xtreme Pump
All Airless Paint sprayer related accessories
- Graco Wagner Titan brand Repair Parts: repair kit, piston rod etc.
- Spray Gun, Spray Tip, Spray hose, swivels etc.
Wanna more products information?
Details of SCENTURY Airless Paint Sprayer
Please note that the final cost depends on the customized service you require, the specifications of the raw materials used, the relevant national laws, and the distance of transportation. Take the example of booking a tall container of products:
Cooperation step By Step
- Communicating Needs: Engage in preliminary discussions to understand the client’s specific requirements, product specifications, quantities, and expected timelines.
- Providing Product Information: Offer detailed information about the products based on the client’s needs, including prices, specifications, and availability.
- Sending Quotations: Based on the client’s requirements, provide a detailed quotation including product prices, shipping costs, delivery times, etc.
- Negotiation Adjustments: Negotiate prices and terms based on client feedback.
- Confirming Order Details: Once an agreement is reached, confirm all details of the order, including quantities, specifications, price, delivery date, and payment terms.
- Signing a Contract: Prepare and sign a formal sales contract, with both parties acknowledging and adhering to the contract terms.
- Production/Procurement Arrangement: Immediately arrange for the production or procurement process once the order is confirmed.
- Quality Control: Perform quality checks during production or procurement to ensure products meet the required standards.
- Choosing Transportation Mode: Select an appropriate mode of transportation (sea freight, air freight, etc.) based on client needs and product characteristics.
- Transportation and Insurance: Arrange for transportation and provide the necessary transport insurance.
- Executing Payment Terms: Proceed with payments as per the terms in the contract, whether advance payment, payment upon delivery, or letter of credit.
- Financial Record Keeping: Maintain transparency and accuracy in financial transaction records.
- Preparing Export Documents: Prepare all necessary export documents such as commercial invoices, packing lists, certificates of origin, etc.
- Assisting in Customs Clearance: Provide assistance, if necessary, to ensure smooth customs clearance.
- Delivery Confirmation: Ensure timely delivery of goods and confirm receipt with the client.
- After-Sales Service: Offer necessary after-sales support, including product usage guidance, quality assurance, and issue resolution.
- Client Feedback: Collect feedback from clients to improve services and products.
- Establishing Long-Term Cooperation: Build long-term business relationships through continuous communication and high-quality service.
Production And Testing
The Importance of Production Testing Quality Assurance
Overview of the Testing Process Assembly Integrity Check
Use of High Standard Testing Equipment and Procedures Advanced Testing Equipment
Compliance with International Standards Quality Certification
Customized Testing for Clients Adaptability to Special Requirements
Packed and shipped for inspection in case of incomplete accessories
A Brief Self-Nomination
SCENTURY was founded in 2006, and we have been in this field for more than 16 years, amazing!
We have previously focused on domestic trade in China and eventually achieved the industry’s top three, annual sales of more than 10 million USD.
- This year, we intend to let the world hear the voice from SCENTURY, so we established the foreign trade department, which is why you can see the reason for this site.
- We have seen that today there are also many factories and wholesalers internationally. However, their level of craftsmanship is still stuck in a few years ago.
- In fact, the production equipment of airless sprayer has been upgraded in recent years, and scentury-tech.com hope our advanced technology can inject fresh blood into this market.
You deserve a better professional china supplier for airless paint sprayer.
The FAQs About Cooperation
Some Common Questions Regarding the Collaboration Order of Airless Paint Sprayers
What's the MOQ for formal order?
Our MOQ is 10-100 units depends on the machine model. Usually the MOQ is 10 units. But sample order is also acceptable.
What's your payment terms?
We could accept T/T and Paypal or Western Union.... For example, for formal order, you can pay 30% deposit, then rest 70% before shipment by detailed goods pictures or video.
What is the lead time?
Sample order is about 3-7 days, mass production is about 20-40 days according to the exact order quantity.
What Shipping methods are available?
- For sample order or small part order, we could ship by DHL/TNT/UPS etc. express or by air.
- For formal order, we could ship by sea, by train or by truck land shipping ways.
We will give you detailed suggestions according to your order.
Can we put our logo on your products? Is there extra charge for it?
Yes, we accept the OEM order based on the order quantity.
- The customized logo sticker is FREE CHARGE.
- and we can also provide OEM service for color, plastic housing design, or even a new product.
What's your warranty?
Our warranty is 12months limited warranty except the easily worn parts.
Which port do you ship your machines?
We ship from Ningbo or Shanghai port China. For the FOB price, we will cover the local freight charge and the forwarder fee / customs fee in loading port, and all the shipping cost / insurance cost / forwarder cost at destination port / import duty tax ... all will be covered by the buyer (or importer).
How to start cooperation with you?
We suggest for sample order first. You can test our products and try our service. Then we can start formal cooperation. and we welcome you to be our distributor in your country.
We're sure you would be satisfied with our quality, service and price.
Welcome to contact us by email or whatsapp for details.
